Cmotion wireless remote focus system

Cmotion wireless remote focus system

Weight of hand unit: 707 g (including battery and marker ring)
Weight of camin: 156 g
Weight of motors: cforce plus: 326 g (including clamp); cforce mini: 173 g (including clamp)
Wireless frequency: 2.4 Ghz
Wireless range: up to 30m (100 feet) indoors, 200m (600 feet) outdoors
Wireless channels: 8 channels
Environmental requirements: from -20° to 50° C (-4! to 122° F)
Operational hand unit hours with fully charged battery: up to 8 hours
Transmission delay: <10ms
Software update via USB port: Yes
Maximum axis control: 3 motors
Motor compatibility: cforce basic, cforce mini, cforce plus
Hardwired operation possible: Yes (connect directly to cforce motor via LBUS cable)
Same function for left and right handed operators: Yes
Independent wireless control units per camin: 1
Display on hand unit: 2.3″” color TFT
Start/Stop function: ARRI, Sony, Red, Canon, Black Magic, Broadcast cameras (via 12p Hirose)
Shows focus , zoom, iris position: Yes
Shows lens data: Yes (cworld required to create lens data. Saves up to 14 lenses on hand unit)
Range finder compatibility: Yes (for cfinder III through LBUS connector of the cforce daisy-chain. For UDM, Cinetape, Through ARRI LCUBE). cdistance is required for range finder read out
Autofocus function: No
Set direction, torque and ramp of motor: Yes
Set digital lens limits: Yes
Shows battery and connection status: Yes
Color themes for optimized display read out: 5 color themes
Compatibility to other products: cdistance, cfinder III, knob solo, pan-bar zoom, steady zoom, UDM (via LCUBE)
Automatic motor calibration: Yes
Manual motor calibration (for lenses without hard stops): Yes
Save settings via USB: Yes