Category: Camera Support
ARRI Follow Focus FF-5 HD, a completely modular, film style follow focus for digital productions. Designed specifically for lenses with a smaller diameter focus barrel, the FF-5’s longer swing arm ensures proper gear position on the focus ring and a lower gear ratio for a more exacting focus pull on smaller diameter lenses or those with compressed focus scales.
The FF-5 HD integral snap-on mechanism locks to 15mm lightweight support rods and can be adapted to work with ARRI standard 15mm or 19mm bridgeplate support rods. ARRI Follow Focus drive gears can be attached to either side of the swing arm, allowing greater mounting flexibility.
ARRI gears are made from low friction Delrin for optimal drive smoothness and use precise self-centering stainless steel couplings to eliminate runout and wear.
For more options, the FF-5 HD is compatible with all ARRI FF-4 Follow Focus accessories. Right and left focus knobs and the FF-5’s longer body allow operation from either camera side with ENG lenses.
Category: Camera Support
The Arri MB-28 swing-away Matte Box comes with two sliding trays and one geared tray. All three are vertical 6×6″” format. Mounted with 19mm bars and supplied with a set of mattes, side flags and top flag.
This is ARRI’s mattebox designed specifically to fit the Angenieux Optimo 24-290mm zoom in addition to prime lenses. One three-stage mattebox can now cover both needs.
Category: Camera Support
Ronford Baker High Hat with 150mm Bowl fitting.
Category: Camera Support
Ronford Baker medium-weight Short tripod legs with 150mm Bowl fitting.
Specifications
Height: With legs spread at 1’8” (50.8cm) to 3’ (91.4cm).
Weight: 18lb (8kg).
Spreader Dimensions: (center to foot) minimum 1’5” (43cm), maximum 2’1” (64cm).
Spreader Weight 4lb 7oz (2kg).
Cased Dimensions 26” x 12” x 11” (65cm x 30cm x 27.5cm)
Cased Weight- 13.5kg (29.7lb)
Category: Camera Support
Ronford Heavyweight Tall 3 stage tripod legs with 150mm Bowl fitting.
Specifications
Height: With legs spread at 1’6” (45.7cm): closed 3ft’ (91.4cm), fully extended 5’6” (167.6cm).
Weight: 22lb (10kg).
Spreader Dimensions: (center to foot) minimum 1’5” (43cm), maximum 2’1” (64cm).
Spreader Weight 4lb 7oz (2kg).
Cased Dimensions 42” x 12” x 11” (105cm x 30cm x 27.5cm) standard.
Cased Weight- 17kg (37.4lb)
Category: Camera Support
Model: 2575D
Capacity
@ 4 in. (102 mm): 133 lbs. (60.5 kg)
@ 6 in. (152 mm): 105 lbs. (47.7 kg)
@ 8 in. (203 mm): 87 lbs. (39.5 kg)
Handle(s): 30°
Bases: Mitchell, 150mm
Tilt: +90° / -90°
Height: 8.4 in. (21.3 cm)
Width: 12.4 in. (31.5 cm)
Depth: 8.6 in. (21.8 cm)
Weight: 22.9 lb. (10.4 kg)
Platform for 2575D: OConnor Plate, 120mm Euro Plate, Panavision Dovetail Plate, Arriflex Dovetail Plate, Arri 24″” (60.96 cm) Plate.
