Accessories

Accessories

  • ARRI Manual Follow focus system

    Category: Camera Support

    ARRI Follow Focus FF-5 HD, a completely modular, film style follow focus for digital productions. Designed specifically for lenses with a smaller diameter focus barrel, the FF-5’s longer swing arm ensures proper gear position on the focus ring and a lower gear ratio for a more exacting focus pull on smaller diameter lenses or those with compressed focus scales.

    The FF-5 HD integral snap-on mechanism locks to 15mm lightweight support rods and can be adapted to work with ARRI standard 15mm or 19mm bridgeplate support rods. ARRI Follow Focus drive gears can be attached to either side of the swing arm, allowing greater mounting flexibility.

    ARRI gears are made from low friction Delrin for optimal drive smoothness and use precise self-centering stainless steel couplings to eliminate runout and wear.

    For more options, the FF-5 HD is compatible with all ARRI FF-4 Follow Focus accessories. Right and left focus knobs and the FF-5’s longer body allow operation from either camera side with ENG lenses.

    Open Product »   Add to ShootKit

  • ARRI Studio MatteBox

    Category: Camera Support

    The Arri MB-28 swing-away Matte Box comes with two sliding trays and one geared tray. All three are vertical 6×6″” format. Mounted with 19mm bars and supplied with a set of mattes, side flags and top flag.

    This is ARRI’s mattebox designed specifically to fit the Angenieux Optimo 24-290mm zoom in addition to prime lenses. One three-stage mattebox can now cover both needs.

    Open Product »   Add to ShootKit

  • Hi Hat

    Category: Camera Support

    Ronford Baker High Hat with 150mm Bowl fitting.

    Open Product »   Add to ShootKit

  • Heavy Duty Tripod (small)

    Category: Camera Support

    Ronford Baker medium-weight Short tripod legs with 150mm Bowl fitting.
    Specifications

    Height: With legs spread at 1’8” (50.8cm) to 3’ (91.4cm).
    Weight: 18lb (8kg).

    Spreader Dimensions: (center to foot) minimum 1’5” (43cm), maximum 2’1” (64cm).
    Spreader Weight 4lb 7oz (2kg).

    Cased Dimensions 26” x 12” x 11” (65cm x 30cm x 27.5cm)
    Cased Weight- 13.5kg (29.7lb)

    Open Product »   Add to ShootKit

  • Heavy Duty Tripod (Big)

    Category: Camera Support

    Ronford Heavyweight Tall 3 stage tripod legs with 150mm Bowl fitting.
    Specifications

    Height: With legs spread at 1’6” (45.7cm): closed 3ft’ (91.4cm), fully extended 5’6” (167.6cm).
    Weight: 22lb (10kg).

    Spreader Dimensions: (center to foot) minimum 1’5” (43cm), maximum 2’1” (64cm).
    Spreader Weight 4lb 7oz (2kg).

    Cased Dimensions 42” x 12” x 11” (105cm x 30cm x 27.5cm) standard.
    Cased Weight- 17kg (37.4lb)

    Open Product »   Add to ShootKit

  • Panasonic 17″ HD-SDI LCD Reference monitor

    Category: Monitors & Recorders

    Panasonic 17″” Monitor BT-LH1710 with waveform function and DVI-D input for DSLR compatibility. 12V or 240V operation.

    Inputs include: Composite, YC, component, SDI, HD-SDI, 60i and 50i plus DVI-D.

    We can supply HDMI cables to DVI-D for DSLR compatibility for Canon EOS 7D and 5D MkII etc.

    Mounted in a flight case with optional heavy-duty rolling light stand for location use.

    Optional 12v dry-fit box battery for location filming.

    Open Product »   Add to ShootKit

  • TvLogic 17″ HD-SDI LCD Reference monitor

    Category: Monitors & Recorders

    TVLogic’s LVM-243W-3G (LVM-243W3G) is a Broadcast standard 24″” LCD Monitor with 1920×1080 Native HD Resolution, with multi-format inputs 3G/Dual-link HD-SDI, traceable colour temperature and broadcast monitor feature-sets including closed caption decoding, built-in Waveform and Vector displays, audio demuxing, on-screan audio level meters and 9 scan modes.

    Features

    1920×1080 Native HD Resolution
    800:1 Contrast Ratio
    2 x HD/SD SDI inputs
    2 x HD/SD through-out
    1 x DVI-I input, 1 x HDMI input (W/HDCP)
    Analog Component/Composite/S-Video/RGB Inputs
    1:1 pixel mapping modes for SD/HD
    Audio Disembedder & Speakers
    Optional 19” Rack Mount Kit available (also VESA compatible)
    Supports TVLogic Color Calibration Utility for proper color alignment.
    3G / Dual-Link 4:4:4 and 1080p60 support
    Matte Finish Panel
    Waveform
    Vector Scope
    Timecode Display
    UMD
    Closed Caption : CEA-608/708
    Embedded Audio Level Meter (16 ch)
    Highlight Focus Assist Function
    PBP Support

    Open Product »   Add to ShootKit

  • TvLogic 5.5″ HD-SDI LCD monitor

    Category: Monitors & Recorders

    The successor to the the popular TV Logic 5.6″” HD monitor which now has a native 1080p display. As with the previous model, it accepts either HDMI or HD-SDI and is ideal for compact on-camera monitoring for DSLR or digital cinematography alike and very popular with focus pullers, as it it only weighs 300g and offers a 176ᴼ viewing angle.

    A 22x18x6cm lightweight magnesium-alloy case houses a 5.5” 1920×1080 LED backlit LCD display with a full complement of preferred features, including DSLR Scale, Focus Assist, Various Scan Models, Markers, Audio Level Metering with speaker, Time code Display – and in the WP model – HDMI loop out via HD-SDI (720p), Waveform/Vector Scope, Y Level Check, and Range Error Check.

    VMI TV Logic 5.5″” monitors work with 12V or 24V operation, by means of a special cable provided with the monitor.
    Specifications

    5.5 inch 1920×1080 Resolution with 750:1 contrast radio, 199x112mm display area and 176ᴼ viewing angle.
    HDMI and HD-SDI inputs
    Will also cross convert and HDMI input to HDSDI output for DSLR applications
    Lightweight Magnesium Housing with external acrylic filter.
    1-1 pixel mode
    LED Backlight
    3G-SDI Level A/B
    Audio LEVEL METER Display
    Blue Only
    Focus Assist
    H/V Delay
    H/V Flip
    Key lock
    Luma(Y’) Zone Check
    MARKER
    Mono
    Range Error
    Temperature Adaptive Color
    TIME CODE Display
    UMD
    User Aspect
    Various Scan modes
    WAVEFORM/VECTOR
    Zoom
    CC-608 ANC
    CC-608 LINE 21
    CC-708

    Open Product »   Add to ShootKit

  • Atomos Shogun Flame 4K 30p on-camera video recorder

    Category: Monitors & Recorders

    Change the way you shoot with Log. Record Log in 4K or HD ProRes/DNxHR from video or raw cameras with the Shogun Flame’s HDMI or SDI inputs and thanks to the AtomHDR engine’s combination of 10+ stops dynamic range, 1500nit brightness and 10-bit color processing you can monitor the HDR Log with vivid, natural colors.

    Open Product »   Add to ShootKit

  • Atomos Shogun Inferno 4K 60p on-camera video recorder

    Category: Monitors & Recorders

    Atomos Shogun Inferno 4:4:4 HD Recorder with 4K record capability and HDR capability. System includes 1,500 nit super-bright excellent 7.1″ HDR/SDR display panel which resolves 10 bit colour and includes comprehensive monitoring tools including critical focus tool. Variable record capability up to 240P and RAW capability too.

    Open Product »   Add to ShootKit

  • Atomos Samurai Blade 1080p on-camera video recorder

    Category: Monitors & Recorders

    Shoot video the way you intended and capture directly from your professional SDI camera to Apple ProRes or Avid DNxHD. Record high-resolution proxies from Arri and Red and edit inside a responsive timeline until you are ready to swap out the proxies for final delivery.

    Open Product »   Add to ShootKit

  • Tilta Nucleus-M 3-motor remote focus system

    Category: Wireless Lens Control

    Weight:

    • FIZ Hand Unit (no batteries): 0.972 lbs
    • Right Handle Grip (no batteries or adapters): 0.582 lbs
    • Left Handle Grip (no batteries or adapters): 0.529 lbs
    • Arri Rosette Male to Handle Grip Adapter: 0.161 lbs
    • Gimbal to Hand Grip Adapter: 0.099 lbs
    • Motor: 0.496 lbs

    Motor Dimensions:

    • Length/Height: 11.43cm
    • Width: 8.26cm (end to end furthest points)
    • Depth: 1.59cm (rod mount section), 1.91cm (base section), 3.49cm (motor section)

    Color: Gunmetal grey

    Material: Aluminum-alloy, stainless steel, ABS plastic, rubber, Brazilian rosewood

    Open Product »   Add to ShootKit

  • Cmotion wireless remote focus system

    Category: Wireless Lens Control

    Weight of hand unit: 707 g (including battery and marker ring)
    Weight of camin: 156 g
    Weight of motors: cforce plus: 326 g (including clamp); cforce mini: 173 g (including clamp)
    Wireless frequency: 2.4 Ghz
    Wireless range: up to 30m (100 feet) indoors, 200m (600 feet) outdoors
    Wireless channels: 8 channels
    Environmental requirements: from -20° to 50° C (-4! to 122° F)
    Operational hand unit hours with fully charged battery: up to 8 hours
    Transmission delay: <10ms
    Software update via USB port: Yes
    Maximum axis control: 3 motors
    Motor compatibility: cforce basic, cforce mini, cforce plus
    Hardwired operation possible: Yes (connect directly to cforce motor via LBUS cable)
    Same function for left and right handed operators: Yes
    Independent wireless control units per camin: 1
    Display on hand unit: 2.3″” color TFT
    Start/Stop function: ARRI, Sony, Red, Canon, Black Magic, Broadcast cameras (via 12p Hirose)
    Shows focus , zoom, iris position: Yes
    Shows lens data: Yes (cworld required to create lens data. Saves up to 14 lenses on hand unit)
    Range finder compatibility: Yes (for cfinder III through LBUS connector of the cforce daisy-chain. For UDM, Cinetape, Through ARRI LCUBE). cdistance is required for range finder read out
    Autofocus function: No
    Set direction, torque and ramp of motor: Yes
    Set digital lens limits: Yes
    Shows battery and connection status: Yes
    Color themes for optimized display read out: 5 color themes
    Compatibility to other products: cdistance, cfinder III, knob solo, pan-bar zoom, steady zoom, UDM (via LCUBE)
    Automatic motor calibration: Yes
    Manual motor calibration (for lenses without hard stops): Yes
    Save settings via USB: Yes

    Open Product »   Add to ShootKit

  • SmallHD 702 Lite 7″ SDI and HDMI On-Camera Monitor

    Category: Monitors & Recorders

    Premium display quality and image analysis with SDI/HDMI Cross Conversion.

    Model: MON-702L
    Input: SDI, HDMI
    Output: SDI, HDMI
    Display: 7-inch, 1280X720, 450nits

    Open Product »   Add to ShootKit

  • O’connor 2575D Fluid head system

    Category: Camera Support

    Model: 2575D

    Capacity
    @ 4 in. (102 mm): 133 lbs. (60.5 kg)
    @ 6 in. (152 mm): 105 lbs. (47.7 kg)
    @ 8 in. (203 mm): 87 lbs. (39.5 kg)

    Handle(s): 30°
    Bases: Mitchell, 150mm
    Tilt: +90° / -90°
    Height: 8.4 in. (21.3 cm)
    Width: 12.4 in. (31.5 cm)
    Depth: 8.6 in. (21.8 cm)
    Weight: 22.9 lb. (10.4 kg)

    Platform for 2575D: OConnor Plate, 120mm Euro Plate, Panavision Dovetail Plate, Arriflex Dovetail Plate, Arri 24″” (60.96 cm) Plate.

    Open Product »   Add to ShootKit

  • BarTech Engineering Analoe Focus Device

    Category: Wireless Lens Control

    Description
    The Bartech Focus Device is a single-channel wireless lens control system, compatible with existing analogmotors (Heden, ZB/SLD, FMG-6, as well as the M-One motor); motor sold separately.
    Key Highlights

    Single-Channel Lens Control System
    900 MHz Data Transmission
    (8) Selectable Sub-channels

    Open Product »   Add to ShootKit

  • Preston Digital Micro Force Zoom Control

    Category: Wireless Lens Control

    The Preston Digital Micro Force zoom control is available in two versions; the V+F3 control for analog motors and the Digital Micro Force2 for digital motors. Both models provide the smooth flawless zooms that have made them the favorite of camera assistants worldwide. Either control can provide the zoom command signal for the FI+Z system as well as drive the internal motors of most Video lenses. A bright digital display shows the speed setting and the maximum speed is set with a new rugged encoder.

    Zoom speed is controlled by applying thumb pressure to the joystick. The rugged Micro Force sensors give the operator precise tactile feedback for fine control.

    The Digital Micro Force2 drives the DM-1X andDM-2 digital motors. It automatically calibrates the motors to the mechanical span of the lens, preventing accidental damage to either the lens or motor. A bright LED bargraph displays the zoom position. Electronic limit stops can be set with the touch of a button.

    The soft stop feature allows the user to automatically slow the zoom a programmed distance from its end of travel. This is especially useful when doing a fast “snap” zoom, or when the user must both operate the camera and control the zoom at the same time.

    The V+F3 control can drive a wide variety of analog zoom motors including the Heden M26T motors as well as the integral Panavision zoom motors.

    The Articulating Pan Arm Adapter attaches the Micro Force zoom control to either an 18mm or 3/4″ pan arm.

    A wide variety of accessories are available for interfacing the Micro Force to either film or video cameras and lenses.

    Open Product »   Add to ShootKit